To prepare for ITI Fitter Theory Exam, the student will need practice sets, mock tests, online tests, previous year papers etc. So that he can prepare for his exam better. For all the candidates preparing for Fitter Theory Exam, very important questions related to ITI Fitter Theory Previous Year Question Paper in Hindi have been given in this post. These questions have come before and many of these questions will be asked in future too. Read them carefully, it will be beneficial for you
1. The crimping process reduces the ……..of a cylindrical object, allowing it to slide into the next section.
• Diameter
• Length
• Width
• Mass
Answer: Diameter
2. In precision measurement two slip gauges are connected.
• By assembling
• By sliding
• By adhesion
• By twisting
Answer: By sliding
3. Which of the following processes is used for removing scale from forging?
• Pickling in acid, tumbling, trimming
• Pickling in acid, tumbling, shot peening
• Tumbling, shot peening, trimming
• Pickling in acid, shot peening, trimming
Answer :Pickling in acid, shot peening, trimming
4. The body of the vice is made of………….
• Of steel
• Of cast iron
• Both (a) and (b)
• None of these
Answer: Of cast iron
5. Which type of file is used for rough work…….
• Single cut file
• Double cut file
• Smooth file
• Any of these
Answer: Double cut file
6. What is the boring process done for………..
• To make a hole
• To shred
• To enlarge a hole
• All of these
Answer: To enlarge a hole
7. Which of the following forging defects is not caused by melting action?
• Dirt
• Slag
• Blow hole
• Seams
Answer: Seams
8. Hand hacksaw blade is made of………….
• Stainless steel
• High speed steel
• Cast iron
• Cast steel
Answer: High speed steel
9. Surface plate is made of –
• Granite
• Cast iron
• Both (a) and (b)
• None of these
Answer: Both (a) and (b)
10. Which part of the vernier caliper is used to measure the depth of an object or hole?
• External large jaws
• Internal small jaws
• Depth probe
• None of these
Answer: Depth probe
11. Least count of vernier caliper is.
• 0.01 mm
• 0.02 mm
• 0.001 mm
• 0.002 mm
Answer :0.02 mm
12. Which part is not present in shaper?
• Table
• Tool head
• Spindle
• None of these
Answer: Spindle
13. There are two sizes of blowhorn steak……….
• Horn
• Sheet
• Round
• None of these
Answer: Round
14. Personal protective equipment is necessary when –
• Owners get hurt
• Employees get hurt
• An employee asks for it
• Engineering, work methods, administrative controls do not provide adequate safety to avoid hazards
Answer :Engineering, work methods, administrative controls do not provide adequate safety to avoid hazards
15. The action which is done to extend a hole by a finite length from one of its edges is called –
• Boring
• Drilling
• Counter-boring
• Counter-sinking
Answer :Counter-boring
16. Angle plate is made of………….
• Closed grain cast iron
• Cast steel
• Tool steel
• High speed steel
Answer: Closed grain cast iron
17. Anvil tools have …….shanks to fit the hardy hole.
• Straight
• Round
• Tapered
• None of these
Answer: Straight
18. The anvil of the brazier is made of…………..
• Ford wrought iron
• Mild steel
• Cast steel
• Aluminium
Answer: Cast steel
19. The ductility of cast iron is…………..
• Poor
• Mild
• High
• Very high
Answer: Poor
20. Buckhorn steak has either a flat or nearly flat narrow ………
• Horn
• Sheet
• Arrow
• None of these
Answer: Horn
21. How do you specifically mention a file?
• On the basis of length
• On the basis of size
• On the basis of grade and cut
• All of these
Answer: All of these
22. If a problem arises while a machine is running, what should be done first?
• Start shouting
• Turn on the electric panel
• Call a senior
• Press the red button in front
Answer :Press the red button in front
23. The cross section of a chisel tool is generally……..
• Rectangular
• Hexagonal
• Square
• Octagon
Answer :Octagon
24. What is the melting point of the filler metal in soldering?
• Below 420°C
• Above 420°C
• Below 520°C
• Above 520°C
Answer: Below 420°C
25. Super smooth file is referred to as…….
• By S
• By DS
• By SS
• By SC
Answer: By SS
26. A single point cutting tool has?
• Positive rake
• Negative rake
• Zero rake
• All of these
Answer: All of these
27. Feeler gauge is used for………
• For clearance thickness
• To measure gap
• To measure diameter
• None of these
Answer: To measure gap
28. The instrument used to measure the thickness of a section with less space is…………..
• Disc type micrometer
• Blade type micrometer
• Internal micrometer
• External micrometer
Answer: Internal micrometer
29. Should machine guards be fitted to protect the machine operator and other people nearby?
• In the running nip point
• From flying chips and sparks
• From rotating parts
• All of the above
Answer: All of the above
30. Who is the most sure?
• Scale
• Micrometer
• Both (a) and (b)
• None of these
Answer: Micrometer
31. When Pusheen Blue is mixed with……..it produces quick drying strains known as marking blue or layout dyes?
• Grease
• Oil
• Methylated spirit
• Plastic
Answer: Methylated spirit
32. The composition of soft solder is –
• Lead – 37%, Tin -63%
• Lead – 50%, Tin – 50%
• Lead – 63%, Tin – 37%
• Lead – 60%, Tin – 40%
Answer :Lead – 37%, Tin -63%
33. Who is responsible for providing you with personal protective equipment?
• Your boss
• Your supervisor
• Your colleague
• You yourself
Answer: Your boss
34. You set a point and mark it……….
• With a prick punch
• With a hammer
• With a chisel
• With a snip
Answer: With a prick punch
35. Pressure is defined as the ratio of ………
• Force/area
• Force/volume
• Normal pressure/volumetric stress
• None of these
Answer: Force/area
36. Which drill is used for soft metal like brass?
• Straight flute drill
• High helix drill
• Low helix drill
• None of these
Answer: Low helix drill
37. What is filing done on a machined surface for?
• To remove ice
• To finish feed marks
• To make sharp corners perfectly square
• All of these
Answer: All of these
38. The formula for density is –
• Mass/Area
• Mass/Force
• Volume/Area
• Mass/Volume
Answer :Mass/Volume
39. The material which is squeezed between the faces of dies is called –
• Misrun
• Hot short
• Lap
• Separation
Answer:Hot short
40. The ability of a substance to be converted into wire is called –
• Ductility
• Hardness
• Toughness
• None of these
Answer: Ductility
41. The combination of electrical soldering is –
• Lead -37%, Tin -63%
• Lead – 50%, Tin – 50%
• Lead -63%, Tin – 37%
• Lead – 60%, Tin – 40%
Answer :Lead -37%, Tin -63%
42. Which of the following are ingot defects?
• Pipe, crack, scab
• Burr metal, decarburised steel, flakes
• Streaks, cracks, lap
• Dross, metal ash, blow holes
Answer :pipe, crack, scab
43. The main use of try square is…………..
• Checking flatness
• Checking squareness
• Checking length
• Checking diameter
Answer :Checking squareness
44. The ratio of pressure to stress is –
• Deformation of the body
• Modulus of elasticity
• Elongation
• None of these
Answer: None of these
45. Which of the following materials is highly ductile?
• Copper
• Ceramic
• Mica
• Cast iron
Answer: Copper
46. The degree of repeatability of an instrument is expressed…………
• By measurement
• By precision
• By traceability
• By hosteresis
Answer:By precision
47. The smallest quantity which can be accurately measured by a measuring instrument is called………….
• Least count
• Small count
• Parallax count
• Device count
Answer :Least count
48. The ability of a substance to be beaten into sheets is called –
• Toughness
• Hardness
• Ductility
• Malleability
Answer : Malleability
49. Least count of outside micrometer is…………
• 0.02 mm
• 0.001 mm
• 0.01 mm
• 0.1 mm
Answer :0.01 mm
In this post, very important information has been given regarding paper 1 fitter theory semester 3 paper 1 fitter theory semester 2 paper 1 fitter theory semester 4 paper fitter theory semester 3 fitter 3rd semester theory paper. If you find this information useful, then share it with your friends and if you want to know or ask something about it, then definitely ask by commenting below.